벤치탑 수질측정기

Challenges such as proper sampling procedures, lab practices, and experimental design are all critically important in obtaining reliable laboratory data. However, the instrumentation used for data collection must not be overlooked. At Xylem Analytics, we have the water quality laboratory instrumentation needed for accurate measurement of parameters such as pH, ORP, dissolved oxygen, conductivity, temperature, ammonium, ammonia, nitrate, chloride, fluoride, and many other ionic species.

  • Benchtop Instruments
  • Benchtop Sensors & Electrodes
  • TOC/VOC Analyzers
  • BOD / DO
YSI MultiLab 4010-1 Laboratory Instrument

YSI 멀티랩 4010-1

 Connect a digital IDS sensor to MultiLab 4010-1 to measure pH, ORP (redox potential), conductivity and DO / BOD (dissolved oxygen / biochemical oxygen demand).

YSI MultiLab 4010-2

YSI 멀티랩 4010-2

 Laboratory equipment to measure pH, ORP, conductivity, BOD and ion activity
 Digital IDS sensors are connected to MultiLab 4010-2 to measure pH, ORP (redox potential), conductivity and DO / BOD (dissolved oxygen / ) With the desired combination of measurement parameters. ISE (ion-selective electrode) can also be connected to the instrument.

YSI MultiLab 4010-3

YSI 멀티랩 4010-3

 pH, ORP, 전도도, BOD 및 이온 활동도를 측정하는 실험실 장비
디지털 IDS 센서를 멀티랩 4010-3에 연결하여 pH, ORP(산화환원전위), 전도도 및 DO/BOD(용존산소량/생물화학적 산소요구량)를 사용자가 원하는 측정 파라미터 조합으로 측정하십시오.

YSI MultiLab IDS Kit

YSI 멀티랩 IDS 키트

 YSI 멀티랩 라인에는 4010-1 (단일 채널), 4010-2 (듀얼 채널) 및 4010-3 (삼중 채널)장비가 포함되어 있으며, 이들 장비는 실험실 사용에 이상적인 메뉴 방식으로 작동합니다.

5100 Dissolved Oxygen Instrument

YSI 5000/5100 DO 실험실 벤치톱 측정기

 정확하고 신뢰할 수 있는 실험실용 YSI 벤치톱 용존 산소 측정 장비 
 두 장비 모두 최대한의 효율성을 위해 자동 보정, 대형 그래픽 디스플레이, 낮은 키패드 프로필 기능을 포함하고 있습니다.

YSI 3200 Conductivity Meter

YSI 3200 전도도 측정기

 YSI 3200은 혁신적인 장비로서 초순수 분석, 다중 지점 검교정 및 프로세스 애플리케이션용 고/저 경보에 대해 비할 데 없이 높은 정확도를 제공합니다.

YSI EcoSense pH1000A

YSI EcoSense pH1000A

The EcoSense pH1000A benchtop meter is the ideal laboratory instrument for reliable measurements. It is an accurate, easy-to-use solution for the measurement of pH/mV/ORP in the laboratory.

TruLab pH/ISE 1320

YSI TruLab 1320 pH/ISE

Measure pH, ORP, and ion activity with the TruLab 1320 dual channel instrument by choosing from our wide selection of electrodes.

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

The FS 3700 Automated Chemistry Analyzer is an advanced continuous flow analyzer designed to improve laboratory productivity by automating wet chemistry test procedures.

SI Analytics Lab 855 pH Benchtop Meter

SI Analytics Lab 855 pH Benchtop Meter

The SI Analytics Lab 855 for pH and Lab 955 for conductivity measurements are perfectly suited benchtop meters for measurements in laboratories, in the chemical and pharmaceutical industries as well as in medical labs.

SI Analytics Lab 865 pH Benchtop Meter

SI Analytics Lab 865 pH Benchtop Meter

The SI Analytics Lab 865 pH benchtop meter provides the maximum degree of operating comfort, reliability and measuring certainty for all applications - perfect for precise pH measurements in quality assurance labs requiring GLP documentation.

SI Analytics Lab 955 Conductivity Benchtop Meter

SI Analytics Lab 955 Conductivity Benchtop Meter

The SI Analytics Lab 955 for conductivity measurements is a perfectly suited benchtop meter for measurements in laboratories in the chemical and pharmaceutical industries as well as in medical labs.

SI Analytics Lab 875 / Benchtop Meter

SI Analytics Lab 875 / 875P Benchtop Meter

The SI Analytics Lab 875 with a digital measuring channel is optimal in the world of digital multi-parameter measurement using IDS®. The IDS® technology allows optimized measurements and effi cient documentation in the simplest manner.

SI Analytics ProLab 2500 Digital Benchtop Meter

SI Analytics ProLab 2500 Digital Benchtop Meter

The SI Analytics ProLab 2500 is a digital high-performance meter with three channels. With its color graphic display protected by glass, high-quality zinc die-casting base as well as the anti-bacterial keyboard cover, it meets even the highest demands.

YSI TruLab pH 1310P

YSI TruLab pH 1310P

Laboratory Instrument for pH, mV (ORP) and temperature.Perform accurate lab pH, mV (ORP) and temperature measurements with the YSI 1310 and 1310P with printer.

EPA approved for drinking water and wastewater compliance reporting of pH.

Instrument Only. Cables, probes/sensors, and accessories sold separately.

YSI TruLab pH 1110

YSI TruLab pH 1110

Laboratory Instrument for pH, mV (ORP) and temperature

Perform accurate lab pH, mV (ORP) and temperature measurements with the YSI 1110. TruLab 1110 pH/mV single channel benchtop instrument with BNC and two banana plug connectors. Includes instrument, universal AC power supply and electrode stand.

EPA approved for drinking water and wastewater compliance reporting of pH.

Instrument Only. Cables, probes/sensors, and accessories sold separately.

YSI TruLab pH/ISE 1320P

YSI TruLab pH/ISE 1320P

Laboratory Instrument for pH, mV (ORP), and Ion Activity Measurement

Measure pH, ORP, and ion activity with the TruLab 1320 dual channel instrument by choosing from our wide selection of electrodes. Data can be conveniently printed from the instrument via the optional integrated printer (1320P).

EPA approved for drinking water and wastewater compliance reporting.

Instrument Only. Cables, probes/sensors, and accessories sold separately.

YSI MultiLab 4010P-1

YSI MultiLab 4010P-1

Laboratory instrument for DO/BOD, pH, ORP, and conductivity measurement. EPA approved for drinking water and wastewater compliance reporting.

Connect digital IDS sensors to the MultiLab 4010-1 for the measurement of DO/BOD, pH, ORP, and conductivity. Data can be conveniently printed from the instrument via the optional integrated printer (4010P-1).

Instrument Only. Cables, probes/sensors, and accessories sold separately.

YSI MultiLab IDS 4120 pH and Temperature Sensor

YSI MultiLab IDS 4120 pH and Temperature Sensor

pH and temperature, plastic, 3 mol KCl, digital, double junction probe, 1.5 meter (~5 ft) cable, refillable reference

YSI 5000 Dissolved Oxygen Instrument

YSI 5000 Dissolved Oxygen Instrument

Accurate, reliable YSI benchtop dissolved oxygen instruments for the laboratory. Easily conduct DO, BODs or OUR/SOUR tests. Both instruments feature: auto-calibration, large, graphic displays and low keypad profiles for maximum efficiency. EPA approved for wastewater compliance reporting of BOD, CBOD, and DO. 

Has the 5000 been your trusted BOD instrument for the last decade? If so, check out our new BOD instrument, the YSI MultiLab.

YSI 5100 Dissolved Oxygen Instrument

YSI 5100 Dissolved Oxygen Instrument

Accurate, reliable YSI benchtop dissolved oxygen instruments for the laboratory. Easily conduct DO, BODs or OUR/SOUR tests. Both instruments feature: auto-calibration, large, graphic displays and low keypad profiles for maximum efficiency. EPA approved for wastewater compliance reporting of BOD, CBOD, and DO.

Has the 5100 been your trusted BOD instrument for the last decade? If so, check out our new BOD instrument, the YSI MultiLab.

YSI ProOBOD Optical BOD Probe

YSI ProOBOD 광학식 BOD 탐침

 ProOBOD® 자기 회전 광학식 BOD 탐침은 국제 버전인 300mL 표준 BOD 병에 맞도록 설계되었으며, 기타 다른 테이퍼와 사용할 수 있습니다.

YSI TruLine Nitrate Electrode Kit

YSI TruLine Nitrate Electrode Kit

Each TruLine ISE features an integrated reference. This eliminates the need for a separate reference half-cell when measuring ion concentration and is more convenient. Each ISE can be refilled with reference/electrode filling solution, extending the life of each ISE. The electrodes also feature a double-junction reference for optimum performance in the lab.

YSI Science pHT-G

YSI Science pHT-G pH Electrode

Our pH electrodes are designed to meet the requirements of a wide variety of laboratory applications. pH electrode options include single, double or triple junction, 3-in-1, micro for small samples, refillable or non-refillable and other special configurations like Iodine/Iodide reference, Platinum junction or ground junction.

YSI Science pHT-Micro

YSI Science pHT-Micro pH Electrode

Our pH electrodes are designed to meet the requirements of a wide variety of laboratory applications. pH electrode options include single, double or triple junction, 3-in-1, micro for small samples, refillable or non-refillable and other special configurations like Iodine/Iodide reference, Platinum junction or ground junction.

YSI TruLine pH 27

YSI TruLine pH 27 Electrode

Our pH electrodes are designed to meet the requirements of a wide variety of laboratory applications. pH electrode options include single, double or triple junction, 3-in-1, micro for small samples, refillable or non-refillable and other special configurations like Iodine/Iodide reference, Platinum junction or ground junction.

YSI IoLine Micro - 3 in 1

YSI IoLine Micro 3 in 1 pH Electrode

Our pH electrodes are designed to meet the requirements of a wide variety of laboratory applications. pH electrode options include single, double or triple junction, 3-in-1, micro for small samples, refillable or non-refillable and other special configurations like Iodine/Iodide reference, Platinum junction or ground junction.

YSI TruLine Ammonia Electrode Kit

YSI TruLine Ammonia Electrode Kit

Each TruLine ISE features an integrated reference. This eliminates the need for a separate reference half-cell when measuring ion concentration and is more convenient. Each ISE can be refilled with reference/electrode filling solution, extending the life of each ISE. The electrodes also feature a double-junction reference for optimum performance in the lab.

YSI MultiLab IDS 4110 pH and Temperature Sensor

YSI MultiLab IDS 4110 pH and Temperature Sensor

pH electrode, plastic, gel, digital, double junction, 1.5 meter (~5 ft) cable

YSI MultiLab IDS 4120 pH and Temperature Sensor

YSI MultiLab IDS 4120 pH and Temperature Sensor

pH and temperature, plastic, 3 mol KCl, digital, double junction probe, 1.5 meter (~5 ft) cable, refillable reference

YSI MultiLab IDS 4110-3 pH and Temperature Sensor

YSI MultiLab IDS 4110-3 pH and Temperature Sensor

pH electrode, plastic, gel, digital, double junction, 3 meter (~10 ft) cable

YSI MultiLab IDS 4130 pH and Temperature Sensor

YSI MultiLab IDS 4130 pH and Temperature Sensor

pH and temperature, glass, 3 mol KCL, digital, double junction, 1.5 meter (~5 ft) cable, refillable reference

YSI MultiLab IDS 4210 ORP Sensor

YSI MultiLab IDS 4210 ORP Sensor

ORP, glass, digital, double junction, 1.5 meter (~5 ft) cable

YSI MultiLab IDS 4310 Conductivity and Temperature Sensor

YSI MultiLab IDS 4310 Conductivity and Temperature Sensor

IDS 4310 digital conductivity/temperature probe for the YSI MultiLab. Features an epoxy body, 4-graphite electrodes, and a 1.5 meter cable. The 4310 probe can only be calibrated with a 1,413 uS/cm conductivity standard (060906) (Select in "Option" drop down menu).

YSI MultiLab IDS 4310-3 Conductivity and Temperature Sensor

YSI MultiLab IDS 4310-3 Conductivity and Temperature Sensor

IDS 4310-3 digital conductivity/temperature probe for the YSI MultiLab. Features an epoxy body, 4-graphite electrodes, and a 3 meter cable. The 4310-3 can only be calibrated with a 1,413 uS/cm conductivity standard (060906) (Select in "Option" drop down menu).

YSI MultiLab IDS 4320 Conductivity and Temperature Sensor

YSI MultiLab IDS 4320 Conductivity and Temperature Sensor

IDS 4320 digital conductivity/temperature probe for the YSI MultiLab. Features a stainless steel body, 2-electrodes, and a 1.5 meter cable. The IDS 4320 probe is designed for ultra-pure water applications and cannot be calibrated by the user, although the probe is factory calibrated.

YSI MultiLab IDS ProOBOD

YSI MultiLab IDS ProOBOD

The IDS ProOBOD® self-stirring optical BOD probe for use with the YSI MultiLab. Designed to fit into standard 300 mL BOD bottles. EPA approved for wastewater compliance reporting of BOD and CBOD.

YSI TruLine Ammonium Electrode Kit

YSI TruLine Ammonium Electrode Kit

The TruLine Ammonium ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Ammonium laboratory electrode kit includes a PVC membrane combination ISE with replaceable sensor module and refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Ammonium ISE range: 0.02 to 1800 mg/L

YSI TruLine Cyanide Electrode Kit

YSI TruLine Cyanide Electrode Kit

The TruLine Cyanide ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Cyanide laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), and a bottle of ISA (30 mL).

Cyanide ISE range: 0.2 to 260 mg/L

EPA approved for wastewater and drinking water compliance reporting of cyanide.

YSI TruLine Iodide Electrode Kit

YSI TruLine Iodide Electrode Kit

The TruLine Iodide ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Iodide laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Iodide ISE range: 0.006 to 127000 mg/L

YSI TruLine Bromide Electrode Kit

YSI TruLine Bromide Electrode Kit

The TruLine Bromide ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Bromide laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Bromide ISE range: 0.4 to 79900 mg/L

EPA approved for wastewater compliance reporting of bromide.

YSI TruLine Copper Electrode Kit

YSI TruLine Copper Electrode Kit

The TruLine Copper ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Copper laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Copper ISE range: 0.06 to 6400 mg/L

YSI TruLine Sodium Electrode Kit

YSI TruLine Sodium Electrode Kit

The TruLine Sodium ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Sodium laboratory electrode kit includes a glass sensor combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Sodium ISE range: 0.1 to 23000 mg/L

YSI TruLine Calcium Electrode Kit

YSI TruLine Calcium Electrode Kit

The TruLine Calcium ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Calcium laboratory electrode kit includes a PVC membrane combination ISE with replaceable sensor module and refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Calcium ISE range: 0.02 to 40000 mg/L

YSI TruLine Lead Electrode Kit

YSI TruLine Lead Electrode Kit

The TruLine Lead ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Lead laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Lead ISE range: 0.02 to 20700 mg/L

YSI TruLine Cadmium Electrode Kit

YSI TruLine Cadmium Electrode Kit

The TruLine Cadmium ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Cadmium laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Cadmium ISE range: 0.1 to 11200 mg/L

YSI TruLine Potassium Electrode Kit

YSI TruLine Potassium Electrode Kit

The TruLine Potassium ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Potassium laboratory electrode kit includes a PVC membrane combination ISE with replaceable sensor module and refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Potassium ISE range: 0.04 to 39000 mg/L

EPA approved for wastewater compliance reporting of potassium.

YSI TruLine Silver/Sulfide Electrode Kit

YSI TruLine Silver/Sulfide Electrode Kit

The TruLine Silver/Sulfide ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Silver/Sulfide laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) silver standard.

Silver/Sulfide ISE range: 0.01 to 107900 mg/L (silver); 0.003 to 32100 mg/L (sulfide)

EPA approved for wastewater compliance reporting of sulfide.

YSI TruLine Chloride Electrode Kit

YSI TruLine Chloride Electrode Kit

The TruLine Chloride ISE features BNC connection and can be used with the YSI TruLab 1320. It can also be used with the YSI MultiLab 4010-2 or 4010-3 if a BNC adapter is installed.

The TruLine Chloride laboratory electrode kit includes a solid state combination ISE with refillable reference, bottle of fill solution (30 mL), bottle of ISA (30 mL), and small bottle (30 mL) of high (1000 mg/L) standard.

Chloride ISE range: 1.8 to 35000 mg/L

EPA approved for wastewater compliance reporting of chloride.

YSI IoLine - 3 in 1

YSI IoLine 3 in 1 pH Electrode

Our pH electrodes are designed to meet the requirements of a wide variety of laboratory applications. pH electrode options include single, double or triple junction, 3-in-1, micro for small samples, refillable or non-refillable and other special configurations like Iodine/Iodide reference, Platinum junction or ground junction.

YSI EcoSense BOD Probe

YSI EcoSense BOD Probe

Self-stirring laboratory BOD probe for use with the EcoSense DO200 or DO200A.
Includes external power adapter and 5908 Cap Membrane Kit (1.25 Mil PE membranes).

YSI Electrode, Double Junction, pH10

YSI Electrode, Double Junction, pH10

Electrode, Double Junction, pH10

OI Analytics CNSolution™ 9310 On-line Cyanide Analyzer

OI Analytical CNSolution™ 9310 On-line Cyanide Analyzer

The OI Analytical CNSolution™ 9310 On-line Cyanide Analyzer is designed to measure available cyanide in precious metal leaching solutions by U.S. EPA Method OIA-1677 and ASTM D 6888-09. The gas-diffusion amperometry technique in these methods has been demonstrated to be free of interferences from copper and metallic sulfides that impair the accuracy of traditional techniques such as titration.

1030W Aurora

OI Analytical Aurora 1030W TOC 분석기

 Aurora 1030W TOC 분석기는 샘플의 총유기탄소(TOC), 총무기탄소(TIC) 및 포기제거불가능유기탄소(NPOC) 함량 분석을 위해 수성 샘플을 처리합니다.

Aurora 1030C TOC Analyzer

OI Analytical Aurora 1030C TOC 분석기

 Aurora 1030C TOC 분석기는 샘플의 총유기탄소(TOC), 총무기탄소(TIC) 및 포기제거불가능유기탄소(NPOC) 함량 분석을 위해 수성 샘플을 처리합니다.  유기탄소 농도가 100 ppb ~ 30,000 ppm인 샘플을 분석할 수 있습니다.  Aurora 1030C는 USEPA 승인 방법, 표준 방법, ASTM, DIN/ISO/CEN 및 EU Methods를 준수합니다. 이용하는 프로토콜에 따라 다르며, 최대 24시간 동안 300개의 샘플 및 연간 100,000여개가 넘는 샘플을 분석할 수 있습니다.

OI Analytical 1088 Rotary TOC Autosampler

OI Analytical 1088 Rotary TOC 오토샘플러

 1088 회전식 오토샘플러는 Aurora 1030W TOC 분석기 또는 Aurora 1030C TOC 분석기와 작동하도록 특수 설계되었습니다.  1088 오토샘플러는 액체 시료를 바이알에서 흡입하며, 각 샘플 부분 표본을 Aurora 1030 TOC 분석기로 이동시켜 분석을 수행합니다.  탈착식 88 포지션 오토샘플러 트레이는 샘플 바이알을 적재하여 완전 자동화 및 무인 작동을 수행합니다.

OI Analytical 1030S TOC Solids Analysis Module

OI Analytical 1030S TOC 고형물 분석 모듈

 1030S 고형물 모듈은 고형물 안에 있는 총 유기탄소 (TOC) 또는 총 탄소 (TC) 함량을 분석할 수있는 시료 준비 모듈입니다. 1030S 모듈은 Aurora 1030W 또는 1030C TOC 분석기와 함께 작동합니다.

OI Analytical 4551A Purge-and-Trap Water Autosampler

OI Analytical 4551A Purge-and-Trap 워터 오토샘플러

 M4551A Purge-and-Trap 워터 오토샘플러는 최대 51 개 샘플에 대해 VOC 분석을 자동화하여 결과를 얻습니다. 오토샘플러와 Eclipse 4660 샘플 농축기를 수직으로 연결하면 별도 공간이 필요치 않습니다.  탈부착이 가능하고 가벼운 회전식 컨베이어는 샘플을 용이하게 올리고 내리게 해주며 나선형 디자인은 중격 천공 정확도를 최적화합니다. 신뢰성이 높고 이미 입증된 샘플 처리 시스템을 갖춘 Model 4551A는 샘플을 연속적으로 처리합니다.

OI Analytical Pulsed Flame Photometric Detector (PFPD)

OI Analytical Pulsed Flame Photometric Detector (PFPD)

 OI Analytical의 특허 모델인 5380 PFPD (Pulsed Flame Photometric Detector)는 최신 기술이 반영된 불꽃 광도 검출기로써 황과 인은 물론26 가지 화합물을 선택적으로 검출합니다.

OI Analytical 4760 Eclipse Purge-and-Trap Sample Concentrator

OI Analytical 4760 Eclipse Purge-and-Trap 샘플 농축기

 Eclipse 4760 Purge & Trap 샘플 농축기는 휘발성 유기화합물 (VOC)의 분석 편의성 측면에서 새로운 기준을 제시합니다. 새로운 4 세대 시스템에는 기술 향상, 직관적 인 소프트웨어 및 벤치 공간을 줄이고 부품에  쉽게 접근할 수있는 슬림-라인 개방형 아키텍처 설계와 더불어 정확하고 신뢰할 수있는 결과를 얻기 위해 전 세계의 화학자들이 사용하는 Eclipse 플랫폼의 인기있는 기능이 포함되어 있습니다 . 

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

OI Analytical Flow Solution™ FS 3700 Automated Chemistry Analyzer

The FS 3700 Automated Chemistry Analyzer is an advanced continuous flow analyzer designed to improve laboratory productivity by automating wet chemistry test procedures.

OI Analytical Eclipse 4660 Purge-and-Trap Sample Concentrator

OI Analytical Eclipse 4660 Purge-and-Trap Sample Concentrator

The Eclipse 4660 Purge-and-Trap Sample Concentrator processes samples for analysis of volatile organic compounds (VOCs) by gas chromatography (GC) or gas chromatography/mass spectrometry (GC/MS). Innovative, patented components within the Eclipse significantly improve sample processing steps of the purge-and-trap technique. 

OI Analytical 4100 Water/Soil Sample Processor

OI Analytical 4100 Water/Soil Sample Processor

The OI Analytical 4100 Water / Soil Sample Processor automates the handling and processing of samples in 40-mL VOA vials for purge-and-trap analysis of volatile organic compounds (VOCs) in accordance with U.S. EPA methods. The 4100 efficiently processes up to 100 drinking water, wastewater, or soil samples and operates with a single or dual Eclipse 4660 purge-and-trap instruments.

LV 20

OI Analytical LV-20 Standards Addition Module

The LV-20 Standards Addition Module is an option for the 4551A Purge-and-Trap Autosampler that injects programmed volumes (1, 2, 5, 10, or 20 microliters) of internal standard, surrogate or matrix spike standards to improve the accuracy and precision of GC-GC-MS analyses.

OI Analytical 9210p On-line TOC Analyzer

OI Analytical 9210p 온라인 TOC 분석기

 OI Analytical 9210p 온라인 총 유기탄소 (TOC) 분석기는 공정수의 TOC 수준을 지속적으로 모니터링하도록 설계되었습니다  9210p는 입증된 가열 과황산나트륨 산화 기술을 사용함으로써 정확하고 신뢰할 수있는 작동은 물론 규정 준수를 보장합니다. 사실상 이 기술을 사용하여 물에 용해된 모든 유기 화합물을 고효율로 산화시킬 수 있습니다.

WTW BOD self check measurement OxiTop®

WTW OxiTop® BOD self check measurement

WTW OxiTop® systems are easy-to-use meters for BOD for self-monitoring. OxiTop®-C measuring systems can execute anaerobic and aerobic examinations across the entire spectrum of biodegradability and evaluate them on the computer