With a memory capacity of 40,000 measurements the easy to use EBI 20 data loggers are suitable for the continuous documentation and monitoring of temperature and humidity. The ebro EBI 20 consists of EBI 20-T1, EBI 20-TE1 and EBI 20-TF for recording temperatures and EBI 20-TH1 for recording temperature and humidity in the chemical and pharmaceutical areas.
All EBI 20 data loggers are delivered with a factory calibration certificate and a user replaceable battery. The data loggers are particularly attractive because of their excellent price-performance ratio.
The 69 x 48 x 22 mm small, waterproof EBI 20-T1, EBI 20-TE1 and EBI 20-TF loggers in the rugged ABS housing with an integrated NTC-sensor and an easy-to-read LCD display can record temperatures in a range from -30 °C to +60 °C. The measuring sequence is freely programmable from 1 minute up to 24 hours, and the memory capacity accepts up to 40,000 measurements. The small EBI 20-TH1 version has nearly the same features - recording temperature and also humidity in the range from 0 % rH to 100% rH.
The 3V lithium battery is easy to change and has an average operating life of approximately 2 years. For evaluating the measured data on a PC, ebro offers an interface with the Winlog.basic evaluation software, which allows to represent the course of temperature and humidity over the time as curves and tables.
The cost-effective starter sets "EBI 20-T1 Set" and "EBI 20-TH1 Set", include the appropriate logger together with interface and software.
|Resolution: Temperature||0.1 °C (0.2 °F)|
(only humidity data
|0.1 % rH|
|Measurement mode||• Endless measurement
• Start immediately until end of memory
• Start / stop measurement
• Start with key press
|Battery||3 V lithium (CR2450), user replaceable|
|Battery lifetime||Up to 24 months, at a sampling rate of 15 min. at +25 °C (77 °F)|
|Dimensions (L x W x H)||69 x 48 x 22 mm*|
|Weight||Approximately 45 g|
|Certifi cate||Factory calibration certifi cate|
* Dimensions and weight just refer to the EBI 20 housing.