The FS 3700 Automated Chemistry Analyzer is an advanced continuous flow analyzer designed to improve laboratory productivity by automating wet chemistry test procedures.
- Features
- Specifications
- 문서
OI Analytical validates the hardware configuration and performance of every method supplied with the FS 3700 analyzer providing users a total analysis solution. Methods for aqueous samples, soil or plant extracts are available to support environmental compliance monitoring, process optimization and research applications.
Modular hardware
Modular hardware allows FIA and/or SFA methods to be run interchangeably on the same unit. Multiple FS 3700 can be linked to provide additional channels of concurrent analysis.
Injection Valves
An automated injection valve is installed in the analysis module chassis when required to run a flow injection analysis (FIA) method.
Chemistry Cartridges
Each chemistry cartridge is pre-assembled with all components needed to perform a validated analysis method – just attach the pump tubing and detector flow cell.
Ordering by 'channel' provides a convenient way to configure the 3700. Modular, flexible hardware provides a great platform for research, in-house or proprietary methods
In-line Heating/UV Digestion
In-line devices for reactions requiring heating or UV digestion are mounted on the underside of chemistry cartridges.
FlowView software provides user programmable control of the UV lamp and cartridge heater set points in 1 °C increments.
Plug-in Detector Modules
Photometric and amperometric detector modules plug-in to the FS 3700 to support methods employing colorimetric chemistries or amperometric measurements. Built-in A/D and ISE capability are standard in each chassis.
The Expanded RangeTM photometric detector and auto-scaling software virtually eliminate off-scale samples. A single calibration curve can range from low ppb to high ppm concentrations.
| Specification | |
|---|---|
| Analysis Module | 1 or 2 chemical analysis channels per chassis |
| Analysis Module Dimensions | 31 in. W x 17.5 in. D x 10.5 in. H 78.74 cm W x 44.45 cm D x 26.67 cm H |
| FS 3700 Dimensions with 90-position Autosampler | Approximately 44 in. (112 cm) W |
| FS 3700 Dimensions with 360-position Autosampler | Approximately 51.5 in. (131 cm) W |
| Injection Valve | 10-port switching valve. chemically-inert wetted surfaces |
| Photometric Detector | 420-880 nm, with path lengths of 5-mm, 10-mm or 20-mm |
| Amperometric Detector | Silver working electrode, silver/silver chloride reference, stainless steel counter electrode |
| In-line Heater | Included as needed, mounted underneath chemistry cartridge, user programmable in 1˚ C increments |
| UV-digestion Module | Included as needed, mounted underneath chemistry cartridge |
| Peristaltic Pump | 24-channel, fits on top of analysis module |
| Autosampler | 90-position, X-Y-Z (90 samples + 9 standards) 360-position, X-Y-Z (360 samples + 10 standards) |
| Tubing | FEP Teflon® and EVA ethylene-vinyl acetate copolymer |
| Manifolds / Fittings | Polysulfone |
| Analysis Methods / Documentation | Validated chemistries for specific analytes / sample matrices with performance data |
| Operating Software | FlowView |
| Operating System | Windows 7, Windows 8 and 8.1 |
| PC to FS 3700 Communications | USB |
| Power Supply | 24VDC universal switching power supply for operation with 90-250VAC 50/60Hz source |
| Power Requirements | 110VAC / 60 Hz or 230VAC / 50 Hz |
| Weight (Analysis Module) | 19.5 kg (43 lbs.), typical for analysis module and pump, two injection valves, chemistry cartridges, detector modules |
| Certifications | CE Safety EN 61010-1 EMC Immunity & Emissions EN 61326-1:2006 |
