Specifically designed to measure ground and surface water pressure, temperature and levels, the WaterLOG® Submersible Pressure Transducer (H-3123) can transmit data digitally over cable lengths of up to 304.8 meters(1000 feet). Its sleek stainless steel diaphragm and polyurethane vented cable, give the Submersible Pressure Transducer the durability it needs to survive rugged environments. Unique to the Submersible Pressure Transducer is the dry air moisture barrier system, providing atmospheric compensation with no on-site calibration required.
The WaterLOG® Submersible Pressure Transducer (H-3123) was designed to measure and transmit water level, temperature and pressure data digitally over long cable lengths.The sensor is simple to install, contains SDI-12 output and it designed to produce accuracy over temperature range that exceeds 3 mm (±0.01 ft) of water.
Accuracy | |
---|---|
Pressure | Less than or equal to 0.02% of full scale output (FSO) over temperature range |
Long-term Stability | Drift is less than ±0.10% of FSO per year |
Resolution | |
---|---|
Pressure | 1 part in 1,000,000 (0.0001%) |
Temperature | 1 part in 1,000,000 (0.0001%) |
Range | Pressure | Depth | Accuracy |
---|---|---|---|
0 to 103.4 kPa (15 psi) | 0 to 10.54 m (34.6 ft) | ±2 mm (0.007 ft) | |
0 to 206.8 kPa (30 psi) | 0 to 21 m (69.2 ft) | ±4 mm (0.01 ft) | |
0 to 344.7 kPa (50 psi) | 0 to 35.16 m (115.35 ft) | ±7 mm (0.02 ft) | |
0 to 689.5 kPa (100 psi) | 0 to 70.3 m (230.7 ft) | ±14 mm (0.05 ft) | |
PSI Ranges: 15, 30, 50 or 100 |
Mechanical | |
---|---|
Size | 22.2 mm max W x 165 mm L (0.875 in max W x 6.5 in L) |
Material | 316 L stainless steel with polyurethane vent tubing |
Connector | 3.048 m (10 ft) Cable (H-3123 to junction box): Polyurethane jacket, vented, shielded, three-wire cable not necessary. UV vented cable sold separately. |
Cable Length | Maximum: 304.8 m (1000 ft) |
Power Requirements | |
---|---|
Voltage Input |
9.6 to 16.0 volts DC |
Current | Standby: 1 mA maximum Active: 15 mA maximum |
SDI-12 | |
---|---|
Baud Rate | 1200 |
Protocol | SDI-12, V1.3 |
Response Time | 4-second measurement sequence |
General Specifications | |
---|---|
Operating Temperature | 0 ° to +40 ° C (non-freezing) |
Compensated Temperature | 0 ° to +40 ° C |
Storage Temperature | -10 ° to +75 ° C |
Pressure Overload | Less than 2 times the rated pressure |
Media Compatibility | Liquids and gases compatible with stainless steel and polyurethane. |
Dry Air System | Prevents moisture from condensing in the submersible pressure transducer. Provides compensation for changes in atmospheric pressure without impairing the sensor's accuracy. |
Warranty | The WaterLOG® Submersible Pressure Transducer (H-3123) is warranted against defects in materials and workmanship for twenty-four months from date of shipment. |
Xylem Analytics는 대표적인 YSI, Sontek, Aanderaa, Global Water, MJK, SI Analytics, OI Analytical & WTW 브랜드들로 이뤄진 세계적인 수질, 유량 관측용 계측기 공급사입니다. Xylem Analytics Korea는 2015년도에 한국고객지원 을 목적으로 사업을 시작하였습니다. 우리는 수자원관리의 향상으로 역할이 확장되어가고 있습니다. 우리의 혁신적인 제품군은 지속적으로 최고수준의 관련 현장의 데이타를 수집하는데 역할을 담당할 것 입니다.
Xylem Analytics 소개Copyright © 2020 Xylem Analytics Korea / Xylem Inc. All Rights Reserved. Specifications on all products subject to change at any time.
Aanderaa, Bellingham + Stanley, ebro, Global Water, MJK, OI Analytical, Royce Technologies, SI Analytics, SonTek, Tideland, WTW and YSI are trademarks of Xylem Inc. or one of its subsidiaries. Learn more about Xylem and Xylem Analytics. Terms & Conditions | Transparency in Supply Chains
We use cookies and beacons to improve your experience on our site. Read more about this in our Privacy Policy.